[ad_1]
Exactly a week ago, the announcement of the single-chip platform Snapdragon 732G (an overclocked version of the well-known Snapdragon 730G) took place, and Xiaomi’s Poco sub-brand was the first to launch a smartphone on the new Qualcomm SoC. And today, as planned, a full presentation of the Poco X3 NFC smartphone took place. By the way, this model has other advantages besides NFC.
Poco X3 NFC is Poco’s fourth model this year. The top-end Poco F2 Pro, the mid-tier Poco X2 and the Poco M2 Pro model, which are at the junction of the middle and lower segment, have already been launched. The positioning of the Poco X3 NFC is identical to that of the Poco M2 Pro, but the latter is available only in India, and the new product stands out with a global registration and will be offered in several countries, including Ukraine. And in terms of the feature-to-price ratio, this is perhaps one of the most attractive offers around today.
The hardware base of the Poco X3 NFC is the Snapdragon 732G, which Qualcomm calls the highest-performance 4G processor in the Snapdragon 700 series. Separately, the manufacturer highlights the LiquidCool Technology 1.0 Plus cooling system, which includes a heat pipe of copper and a graphite thermal pad for efficient cooling and heat dissipation. In the AnTuTu test suite, the novelty is earning more than 300,000 points.
The Poco X3 NFC also features a large 6.67-inch IPS FHD + display (20: 9 aspect ratio) with 120Hz refresh rate, 240Hz touch-layer polling, and HDR10. The front camera with a resolution of 20 megapixels is embedded in the active area in the center, as in the Poco M2 Pro. The fingerprint scanner is integrated into the power button on the side.
The main camera of the Poco X3 NFC consists of four modules and has a very unusual design. As can be seen in the images, one module is located in the center of the block and the rest are distributed symmetrically along the axes of the diagonals of the conventional parallelogram. Instead of the fifth module, LED flash.
The main module uses a 64 megapixel (1 / 1.73 ″, 0.8 μm) Sony IMX682 sensor and a wide-angle lens with six plastic lenses with an aperture of f / 1.9. It is accompanied by a 13MP ultra-wide-angle module with a 119˚ angle of view, a 2MP module for macro photography with a minimum focus distance of 4 cm and another 2-megapixel module to evaluate the depth of the scene and the background blur in portrait mode. There is no telephoto lens or optical stabilization on the Poco X3 NFC camera.
The Poco X3 NFC comes with a 5160 mAh battery and supports a 33 W charge. A full charge with the included 33 W charger takes 65 minutes.
The rest can be highlighted USB-C and 3.5 mm jack for connecting headphones, Wi-Fi a / b / g / n / ac wireless interfaces and Bluetooth 5.1 (and NFC, of course), stereo speakers with 4 resonators cm3 and 1 cm3 up and down, as well as protection against dust and humidity according to IP53 standard.
The Poco X3 NFC’s frame is made of aluminum alloy, the screen is protected by tempered Gorilla Glass 5, and the back is made of polycarbonate. The dimensions are 165.3 × 76.8 × 9.4mm with a mass of 215g. The smartphone is equipped with MIUI 12 based on the Android 10 operating system.
Poco X3 NFC is available in two colors: Shadow Gray or Cobalt Blue. There are also two memory configurations: 6/64 GB and 6/128 GB. Pre-orders will begin to be accepted from September 8 at a special discounted price of € 199 and € 249 depending on storage capacity, while regular prices are € 229 and € 269, respectively. As soon as the price and release dates for Ukraine appear, we will update the note.
Source: GSM Arena
