[ad_1]
Fujifilm already released its best camera to date in 2020 (the X-T4), but it’s not resting on its laurels. The company’s latest, the X-S10, promises to be almost as capable a camera, but for a lot less money – it costs around $ 1,000 versus the X-T4’s $ 1,700. That’s a pretty significant delta, money you can invest in a quality lens. And there isn’t much in the X-T4 that isn’t included in the X-S10.
Fujifilm X-S10 (Image: Fujifilm)
The X-S10 uses Fujifilm’s current generation 26.2MP X-Trans image sensor, mounted on a 5-axis stabilizer. It is not as powerful as the X-T4’s IBIS system, but it promises to offer six correction steps for most lenses.
Autofocus is just as capable, too. The camera supports face and eye detection, and can track subjects at 8fps using its mechanical shutter, or up to 30fps using its silent electronic shutter.
The controls are a bit different than the typical Fujifilm X camera. Instead of a dedicated shutter speed dial at the top, the X-S10 has a traditional PASM mode dial. Fujifilm says it should help users new to the system adjust; you will still have the option of wearing the aperture ring on the lenses, if you prefer.
Fujifilm X-S10 (Image: Fujifilm)
Manual control is there when you need it – there are dials on the front and rear to control exposure, and a small eight-way joystick for setting focus and navigating menus. You can configure the camera to capture Raw or JPG photos.
Its fully automatic mode does a couple of things that other Fujifilm models cannot: For one, it can work in Raw format when the camera is set to automatic. For JPG capture, the X-S10 will automatically select the best film simulation and apply color chrome and dynamic range adjustment based on your image content.
You can also work in semi-automatic modes, such as aperture and shutter priority, and select from a number of built-in film simulations to change the colors and contrast of your image. The camera includes an onscreen guide so you know what each one does, so you don’t have to remember that Velvia is Vivid and Eternal is a movie look.
The electronic viewfinder has the same quality and magnification as that of the X-T30. It’s typical of a mid-range mirrorless model, with a 0.62x magnification rating that’s slightly smaller than that found on premium models. The rear LCD screen is a 3-inch touch screen; It is mounted on a variable angle hinge, so you can face forward for selfies and vlogs.
Fujifilm X-S10 (Image: Fujifilm)
As a video camera, the X-S10 is very capable. It internally records 4K at up to 30fps in 8-bit 4: 2: 0 quality and can output a clean 10-bit 4: 2: 2 signal via micro HDMI. Slow motion is also an option, with support for 120 and 240 fps at 1080p. In addition to film simulations, the F-Log flat profile is included.
The body is magnesium alloy, but the camera is not sealed against dust or splashes; you can use an X-T4 in a monsoon, but keep the skies clear with this one. Cutting off the weather protection also helps reduce weight – the body weighs just one hair over a pound.
The body itself is quite slim, but it does have a deep grip, an advantage if you plan on using larger lenses. It’s not just an ergonomic decision: the grip houses the NP-W126S battery and the SDXC memory card slot.
We will get a closer look at the Fujifilm X-S10 soon; it will ship to customers in mid-November. You can buy it as a body for just $ 999.95 or equipped with a zoom lens. An XF 18-55mm F2.8-4 kit costs $ 1,399.95 and an XF 16-80mm F4 OIS WR costs $ 1,499.95.
Fujifilm XF 10-24mm F4 R OIS WR (Image: Fujifilm)
In addition to the camera, Fujifilm is adding a new lens to the mix. The XF 10-24mm F4 R OIS WR has the same optics as the old XF 10-24mm, but adds weather sealing and a locking aperture ring to the mix. It is priced at $ 999.95 and will ship in November.
There are also two new lenses on the company’s XF development roadmap. Expect an XF 18mm F1.4 and a 70-300mm F4-5.6 OIS to go on sale next year.
