[ad_1]
DIY Plastic Water Bottle Mask Strap
Date April 22, 2020 Time 07:55 hrs.
Green Ideas DIY Mask “Earth Day”. A simple mask from a plastic water bottle. Very practical.
During this period, I have to wear a mask to go out every day to prevent COVID-19, but the problem is that the strap hurts the ears when used for a long time. And sometimes too loose It is definitely not safe to prevent disease Today, let’s share a simple DIY mask mask method. For temporary use From existing plastic water bottles Please try to follow the picture immediately.
The procedure for making a mask strap is as follows
1. Prepare the kit Plastic bottles, scissors, cutter and pens.
2. Pull the label on the side of the bottle and use the pen to mark the point to be cut. (The part that is smeared with glue is not used.) Then draw the heading and end in a circle.
3. Use a cutter to pierce the bottle and draw along the drawing. The length is the same as the bottle size, about 18cm wide and about 1cm wide, or you can measure the width and length as required. But don’t forget that the head and end should be cut in a circle.
4. When the indentation comes out until the plastic strap is obtained Use scissors to trim the ordered edges.
5. Fold the rounded part around the head and finish. To be used to hook the mask
Tips for choosing a plastic bottle to use as a mask strap You should choose plastic bottles that are smooth and wide enough. To make straps easier to cut And this is all a DIY mask strap For simple household waste materials While it’s also better than expected You can use and share it right away
[ad_2]
