[ad_1]
Face screen “FG-F10M”
Sharp will launch high-performance face masks using Moseye technology cultivated in the development of liquid crystal panels starting November 9. A line of 4 types and 6 models with different film shapes, frame materials and sizes. Prices range from 1,980 yen (tax included) to 8,980 yen (tax included). A replacement film is also available as an option. Replacement film starts at 3 sheets / 2,980 yen (tax included).
line up
・ Face Shield “FG-800M” Size M Titanium 8980 yen Released on November 30
・ “FG-800S” face shield size S titanium 8980 yen November 30
・ Eye Shield “FG-500M” Size M Titanium 7,480 yen November 27
・ Mouth Shield “FG-300M” Size M Titanium 5,980 yen December 7
・ Mouse Shield “FG-300S” Size S Titanium 5,980 yen December 7
・ Face shield “FG-F10M” Resin size M 1,980 yen November 9
Health Articles for Splash Prevention Measures Targeted at the Front Desk of Companies and Service Industries Providing Face-to-Face Customer Service
Mouse Shield “FG-300M”
Dress code
Eye protector “FG-500M”
Dress code
The characteristic is that it uses the “Mosseye technology” used in LCD televisions and AQUOS (some models like the XL9 series).
In AQUOS, by using Moseye technology on the surface of the liquid crystal panel, the reflection on the panel was largely suppressed and helped to improve the contrast sensation of the displayed image, but in the product this time it released, a film that prevents splashing. It uses Moseye technology on the surface. As a result, it achieves higher anti-reflective and anti-fog performance than conventional films, and always maintains a clear view. Also, when combined with a light and strong titanium frame (FG-800 / 500/300 series only), it has a high design and ease of use, and differs from general face shields.
Additionally, Moseye technology was adopted in AQUOS from 2012 to 2014, and Moseye-equipped models were not released after the UD20 series. With this face shield, Moseye technology has been adopted into products for the first time in approximately 6 years.
Face shield “FG-800M”
The lineup includes a face shield that covers the entire face with film, an eye shield that covers the area around the eyes, and a mouth guard that covers the mouth and nose. As for the face shield, we will also prepare a model with a resin frame to keep the price low.
The titanium frame used in the FG-800 / 500/300 series is manufactured by Sabae in Fukui prefecture. The film is manufactured in Sharp Yoneko’s clean room and all models are said to be high quality “Made in JAPAN”. There is no difference in performance between the films included in each type.
Moss eyes are characterized by an uneven structure of nanometer size (100-200 nm) that resembles the eyes of a moth that can fly even in the dark. In principle, these fine irregularities continually change the index of refraction of the external light and eliminate the interface causing the reflection, thus achieving low reflection.
In addition, it maintains a low reflectance for a wide range of light, from short wavelengths to long wavelengths. The film is said to be finished in a natural color with little coloration.
Moss eye with irregular nano-sized structure (100-200 nm)
Small irregularities continuously change the index of refraction of external light, suppressing glare due to reflection.
Has low reflectance for a wide range of wavelengths
Moss eye vs non moss eye comparison
Installation example of “FG-F10M”. The surroundings are not reflected on the film.
In addition to low reflection performance, it also features “anti-fog performance” that prevents fogging. Using a newly developed special ultra-hydrophilic acrylic resin for the face shield on the surface of the moth eye structure, the fine uneven structure increases the surface area of the water droplets. Then the water droplets that adhere to the surface are immediately dried and, in many cases, cloudiness can be avoided.
It has high anti-fog performance that is difficult to fog
Demonstrates how cloudiness occurs when steam is applied to moss eye and non mosquito eye films. Moss eye looks clear without clouding even when exposed to steam
Also, high transmission performance is achieved by using polycarbonate, which is also used for CD / DVD light guide plate and liquid crystal backlight, as the base material of the film. By combining it with moth eye processing, it is possible to maintain high transmittance over a wide range of wavelengths, making it clear and less tiring, and visibility can be maintained.
Get a clear view It is said that it will not be difficult to see and you can continue to wear it more comfortably without stress than conventional face shield.
Furthermore, since Moseye has an extremely fine irregular structure, it was previously noted that “it is difficult to remove oily fingerprints and maintenance is difficult.”
Regarding the durability of the face shield, company staff said: “If you wipe it with a soft material such as a towel with rubbing alcohol to disinfect, dirt and fingerprints can be wiped off. Also, even if you repeat cleaning a 1,000 times, the durability of the moth eye is maintained. We have confirmed that it is done. It depends on how it is used, but it is easy to maintain and durable. ”
Mr. Issei Oura, who was in charge of the face shield design, also took the stage at the recital.
About product design “Wearing masks and face shields in work and life has become commonplace, and infection prevention has become a culture now. However, when these infection prevention items are consider “products”, design and fashion As a product designer, I wanted to make a proposal that sanitary and infection protection equipment would be fashionable: the material and shape of the shield, the fit of the frame and the line of the user’s face. I designed it with attention to detail, like making it look neat. ”
The “SHARP” logo is engraved on the frame with a laser.
[ad_2]
